Product description
Oak shingles, wedge-split, different widths, with bevel (chip), according to DIN 68119
| Characteristics | Quality class 1 | ||
| Annual ring inclination | permissible: 90º - 30º to the shingle width | ||
| Fiber deviation | permissible: up to 50 mm from a parallel to the side edge at a distance of 300 mm from the shingle base (Standard: The fibers run parallel to the side edges) | ||
| Squareness at the shingle base | permissible: Deviation up to 8 % of the width (standard: only 3 mm, regardless of the shingle width) | ||
| Knots | not permitted on the front side | Permissible: firmly intergrown knots (smallest Ø 20 mm) Standard: only 10 mm! | Not permitted on 60 % of the shingle length, measured from the shingle base |
| Color | permissible: Color differences based on natural properties | ||
| Resin galls | permissible if they do not show through | ||
| Insect damage | not permitted | ||
| cracks | permissible | ||
| Sapwood | permissible to a small extent | inadmissible | |
| Deformation | permissible: Limit deviation from the plane max. 4 % of the sum of shingle length and shingle width (Standard: max. 10 % of the delivery!) | ||
| Limit dimensions a) Length b) Width | permissible: +25 mm to -6 mm. For 10 % of the delivery - 6 % of the length (standard: +30 mm to -5 mm for the entire quantity) permissible: +-5 % of the nominal dimension for shingles of the same width (standard: +-1 mm regardless of the nominal width) | ||
| Parallelism | permissible: Limit deviation 3% of the length (Ott standard: 3 mm!) | ||
| Shingle width for standard shingles | Standard width: 80 mm and more For European wood species, a maximum of 10 % may be up to 60 mm wide. For non-European wood species, a maximum of 20 % may be up to 75 mm wide. (Standard: average width >= 100 mm!) | ||
This Product was added to our catalogue on 12/02/2015.
Last viewed:
A product slider follows - use the tab key to navigate to the individual articles.
Oak shingles 40cm long in a bundle with 8.0 meters width
