Wakol MS 260 parquet adhesive firmly elastic 18 kg per container

Wakol MS 260 parquet adhesive, elastic - 18 kg

Application range for solid wood flooring up to 180 mm wide

Firm-elastic, 1-component parquet adhesive for laying

• 10 mm solid wood laminate flooring to DIN EN 13227
• Mosaic parquet in accordance with DIN EN 13488
• Raised edge lamella parquet according to DIN EN 14761,
  min. 16 mm thick, max. 200 mm long
• Strip parquet in accordance with DIN EN 13226
• Multi-layer parquet in accordance with DIN EN 13489
• Solid wood planks in accordance with DIN EN 13226 and DIN EN 13990,
  up to max. 18 cm wide,
  Wood type oak up to max. 20 cm wide
• Wood plaster RE / WE according to DIN 68702
• Cork floor coverings (flat) according to ISO 3813 or DIN EN 12104
• Cork floor coverings with HDF / MDF middle layer and cork backing

on absorbent and non-absorbent substrates indoors

Characteristics

• Suitable for underfloor heating
• solvent-free in accordance with TRGS 610
• very low emissions
• Very high final strength
• complies with DIN EN 14293
• water-free - no wood swelling
• Risk of tear-off joints minimized
• Connected Systems (warranty with LOBA system)
• Container size 18 kg
• Application time approx. 60 minutes
• Load capacity after 24 hours
• Surface treatment after 24 hours

Consumption

• Cork coverings
  TKB A2 - approx. 400 - 450 g/m²
• Mosaic and small-format finished parquet
  TKB B3 - approx. 800 - 1000 g/m²
• Large-format finished parquet, cork flooring on backing
  TKB B5 - approx. 700 - 900 g/m²
• Lamparquet, upright lamella parquet, strip parquet, small-format prefabricated parquet and wood paving
  TKB B11 - approx. 1000 - 1200 g/m²
• Large-format strip and prefinished parquet and solid planks
  TKB B13 - approx. 1100 - 1300 g/m²
• large-format solid planks
  TKB B 15 - approx. 1400 - 1500 g/m²
• Parquet types with tongue and groove joints up to max. 4 CM % or 85 % corresponding relative humidity
  WAKOL special toothing 5 - approx. 1700 - 1800 g/m²