Wakol MS 260 parquet adhesive firmly elastic 18 kg per container

Wakol MS 260 parquet adhesive, elastic - 18 kg

Application range for solid wood planks up to 180mm wide

Firm-elastic, 1-component parquet adhesive for the installation of

• 10 mm solid wood lamparquet to DIN EN 13227
• Mosaic parquet to DIN EN 13488
• Upright lamella parquet to DIN EN 14761,
  min. 16 mm thick, max. 200 mm long
• Strip parquet to DIN EN 13226
• Multi-layer parquet to DIN EN 13489
• Solid wood planks to DIN EN 13226 and DIN EN 13990,
  up to max. 18 cm wide,
  Oak up to max. 20 cm wide
• Wood block RE / WE to DIN 68702
• Cork floor coverings (flat) to ISO 3813 or DIN EN 12104
• Cork floor coverings with HDF / MDF middle layer and cork backing

on absorbent and non-absorbent subfloors indoors

Properties

• Suitable for underfloor heating
• solvent-free in accordance with TRGS 610
• very low emissions
• very high final strength
• complies with DIN EN 14293
• water-free - no wood swelling
• Risk of tear-off joints minimized
• Connected Systems (warranty with LOBA system)
• Container size 18 kg
• Installation time approx. 60 minutes
• Load capacity after 24 hrs.
• Surface treatment after 24 hrs.

Consumption

• Cork floor coverings
  TKB A2 - approx. 400 - 450 g/m²
• Mosaic and small-format prefinished parquet
  TKB B3 - approx. 800 - 1000 g/m²
• Large-format prefinished parquet, cork flooring on carrier
  TKB B5 - approx. 700 - 900 g/m²
• Lamparquet, upright lamella parquet, strip parquet, small-format prefinished parquet and wood block
  TKB B11 - approx. 1000 - 1200 g/m²
• Large-format strip and prefinished parquet as well as solid planks
  TKB B13 - approx. 1100 - 1300 g/m²
• Large-format solid planks
  TKB B 15 - approx. 1400 - 1500 g/m²
• Parquet types with tongue/groove connection up to max. 4 CM % or 85 % corresponding relative humidity
  WAKOL special toothing 5 - approx. 1700 - 1800 g/m²